C-Warmer Dual: Anesthetic / Composite Warmer
C-Warmer Dual is an enhanced version of our C-Warmer series. Featuring two heat sinks that can be set to different temperatures, it helps shorten procedure times and increases overall efficiency. C-Warmers are engineered to improve comfort for both doctors and patients. The thermostatically controlled cartridge/composite warmer significantly decreases curing time by increasing composite flowability, while conveniently warming anesthetics and composites in a single unit. It also enhances patient comfort by delivering restorations at body temperature, resulting in reduced injection pain. With its compact design, intuitive operation, and practical functionality, it delivers a noticeable improvement to daily clinical workflows.
Instructions
- Press and hold the power button for 1 second to turn on the warmer.
- To adjust the temperature of the left heat sink, press and hold the ▲ button for 3 seconds until the temperature display flashes.
To adjust the right heat sink, press and hold the ▼ button for 3 seconds. - Increase or decrease the temperature in 1°C increments by pressing ▲ or ▼.
- The selected temperature will be saved automatically after 5 seconds.
- After setting the desired temperature, allow approximately 15 minutes for warming.
Features
Recommended Temperature Setting
- Anesthetic : 37°C (body temperature)
- Composite : 40°C~45°C
- Has the ability to set two different temperatures for more efficient work
- Precise temperature control with 1°C increments
- Supports universal voltage from 100V to 240V
- Heats to 40°C in about 10~15 mins (Varies depending on environment)
- You can choose any 2 out of 5 options for slot configurations
Advantages
- Upgraded model of our C-Warmer Series
- Freely adjustable temperature with LED digital display between 30°C~70°C
- All buttons located on top of the warmer
- Reduces microleakage
- Improves the flow capacities of composite
- Heaters are installed in the whole body of the warmer allowing heat to circulate and warm the composites thoroughly
- It is safe to touch the warmer when heated because heat is not fully released outside the body
- Maintains constant temperature for all day use with efficient power consumption
C-Warmer Dual Slot Configuration Options
Type A - Anesthetics
- 2 Large Slots (15mm diameter) - can hold anesthetic syringe or compule dispenser gun
- 8 Small Slots (9mm diameter) - can hold anesthetic cartridges
Type B - Compules
- 1 Large Slot (15mm diameter) -can hold anesthetic syringe or compule dispenser gun
- 4 Long Slots (7mm diameter) - can hold multiple compules
Type C - Composites
- 1 Large Slot (14.5mm diameter) can hold anesthetic syringe or compule dispenser gun
- 6 Medium Slots (12mm diameter) can hold composite resins
Type D - Larger Composites
- 4 Extra Large Slots (18.6mm diameter) - can hold larger composites (compatible with 3M Composites)
Type E - Larger Composites and Flowable Resins
- 3 Large Slots (15mm diameter) - can hold larger composites (compatible with 3M Composites)
- 4 Medium Slots (10mm diameter) - can hold flowable composite resins
More Images
C-Warmer Dual: Anesthetic / Composite Warmer
C-Warmer Dual is an enhanced version of our C-Warmer series. Featuring two heat sinks that can be set to different temperatures, it helps shorten procedure times and increases overall efficiency. C-Warmers are engineered to improve comfort for both doctors and patients. The thermostatically controlled cartridge/composite warmer significantly decreases curing time by increasing composite flowability, while conveniently warming anesthetics and composites in a single unit. It also enhances patient comfort by delivering restorations at body temperature, resulting in reduced injection pain. With its compact design, intuitive operation, and practical functionality, it delivers a noticeable improvement to daily clinical workflows.
Instructions
- Press and hold the power button for 1 second to turn on the warmer.
- To adjust the temperature of the left heat sink, press and hold the ▲ button for 3 seconds until the temperature display flashes.
To adjust the right heat sink, press and hold the ▼ button for 3 seconds. - Increase or decrease the temperature in 1°C increments by pressing ▲ or ▼.
- The selected temperature will be saved automatically after 5 seconds.
- After setting the desired temperature, allow approximately 15 minutes for warming.
Features
Recommended Temperature Setting
- Anesthetic : 37°C (body temperature)
- Composite : 40°C~45°C
- Has the ability to set two different temperatures for more efficient work
- Precise temperature control with 1°C increments
- Supports universal voltage from 100V to 240V
- Heats to 40°C in about 10~15 mins (Varies depending on environment)
- You can choose any 2 out of 5 options for slot configurations
Advantages
- Upgraded model of our C-Warmer Series
- Freely adjustable temperature with LED digital display between 30°C~70°C
- All buttons located on top of the warmer
- Reduces microleakage
- Improves the flow capacities of composite
- Heaters are installed in the whole body of the warmer allowing heat to circulate and warm the composites thoroughly
- It is safe to touch the warmer when heated because heat is not fully released outside the body
- Maintains constant temperature for all day use with efficient power consumption
C-Warmer Dual Slot Configuration Options
Type A - Anesthetics
- 2 Large Slots (15mm diameter) - can hold anesthetic syringe or compule dispenser gun
- 8 Small Slots (9mm diameter) - can hold anesthetic cartridges
Type B - Compules
- 1 Large Slot (15mm diameter) -can hold anesthetic syringe or compule dispenser gun
- 4 Long Slots (7mm diameter) - can hold multiple compules
Type C - Composites
- 1 Large Slot (14.5mm diameter) can hold anesthetic syringe or compule dispenser gun
- 6 Medium Slots (12mm diameter) can hold composite resins
Type D - Larger Composites
- 4 Extra Large Slots (18.6mm diameter) - can hold larger composites (compatible with 3M Composites)
Type E - Larger Composites and Flowable Resins
- 3 Large Slots (15mm diameter) - can hold larger composites (compatible with 3M Composites)
- 4 Medium Slots (10mm diameter) - can hold flowable composite resins
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
C-Warmer Dual is an enhanced version of our C-Warmer series. Featuring two heat sinks that can be set to different temperatures, it helps shorten procedure times and increases overall efficiency. C-Warmers are engineered to improve comfort for both doctors and patients. The thermostatically controlled cartridge/composite warmer significantly decreases curing time by increasing composite flowability, while conveniently warming anesthetics and composites in a single unit. It also enhances patient comfort by delivering restorations at body temperature, resulting in reduced injection pain. With its compact design, intuitive operation, and practical functionality, it delivers a noticeable improvement to daily clinical workflows.
Instructions
- Press and hold the power button for 1 second to turn on the warmer.
- To adjust the temperature of the left heat sink, press and hold the ▲ button for 3 seconds until the temperature display flashes.
To adjust the right heat sink, press and hold the ▼ button for 3 seconds. - Increase or decrease the temperature in 1°C increments by pressing ▲ or ▼.
- The selected temperature will be saved automatically after 5 seconds.
- After setting the desired temperature, allow approximately 15 minutes for warming.
Features
Recommended Temperature Setting
- Anesthetic : 37°C (body temperature)
- Composite : 40°C~45°C
- Has the ability to set two different temperatures for more efficient work
- Precise temperature control with 1°C increments
- Supports universal voltage from 100V to 240V
- Heats to 40°C in about 10~15 mins (Varies depending on environment)
- You can choose any 2 out of 5 options for slot configurations
Advantages
- Upgraded model of our C-Warmer Series
- Freely adjustable temperature with LED digital display between 30°C~70°C
- All buttons located on top of the warmer
- Reduces microleakage
- Improves the flow capacities of composite
- Heaters are installed in the whole body of the warmer allowing heat to circulate and warm the composites thoroughly
- It is safe to touch the warmer when heated because heat is not fully released outside the body
- Maintains constant temperature for all day use with efficient power consumption
C-Warmer Dual Slot Configuration Options
Type A - Anesthetics
- 2 Large Slots (15mm diameter) - can hold anesthetic syringe or compule dispenser gun
- 8 Small Slots (9mm diameter) - can hold anesthetic cartridges
Type B - Compules
- 1 Large Slot (15mm diameter) -can hold anesthetic syringe or compule dispenser gun
- 4 Long Slots (7mm diameter) - can hold multiple compules
Type C - Composites
- 1 Large Slot (14.5mm diameter) can hold anesthetic syringe or compule dispenser gun
- 6 Medium Slots (12mm diameter) can hold composite resins
Type D - Larger Composites
- 4 Extra Large Slots (18.6mm diameter) - can hold larger composites (compatible with 3M Composites)
Type E - Larger Composites and Flowable Resins
- 3 Large Slots (15mm diameter) - can hold larger composites (compatible with 3M Composites)
- 4 Medium Slots (10mm diameter) - can hold flowable composite resins